TurboV EVO/Remote

It can sometimes be a pain trying to get every last MHz out of yoursystem. You are constantly rebooting, stress testing each setting untilyou find the crashing point. With the TurboV EVO software, coupled withtheir TurboV Remote, you can quickly change settings without having torestart your computer!

Installing the Remote is as simple as plugging it into themotherboard, though since it passes through the I/O shield, you willhave to install it after you get the motherboardinstalled in the case. Those with large heat sink and fan combos willfind it a bit frustrating trying to get this little bitty connecterplugged in. Personally, I would rather see the header for this with therest of the I/O, perhaps above the reset CMOS button since that iswhere it passes through the I/O shield.

Once you have your operating system installed, simply run the ASUSDVD and install the TurboV EVO, Remote, and EPU software. You’ll wantto make sure and put a shortcut to the Remote software in your startupmenu, or you will need to open it manually every time your PC restarts.

Taking a glance at the included remote, we have the Power buttonwhich functions exactly like the one on your case (and the one on themotherboard itself). Below that, you see the “Turbo Key�buttons. Thisallows you to use the 3 different Auto Overclocking profiles we saw inthe BIOS, so that way you can change the system speed on the fly!Pressing ��adds 1 to the BCLK of the system, �“subtracts 1 from theBCLK. This is quite handy for fine-tuning your system. At the bottom,we have the EPU Manual and Auto Mode. This allows you to set yoursystem to run at very low levels (even below default clock speeds) tokeep heat and noise down, and with the push of button, crank it up forplaying games.

Once you’ve got it all set up, it works great! As you can see above,changing the BCLK brings up a screen clearly showing what you’ve done.

Additionally, when you press one of the EPU buttons, it gives youthe choice of performance levels. Overall, I was happy with the way thesoftware worked. The graphical layover is a very nice touch, but wouldlike to find a way to adjust the amount of time it is displayed after abutton press (I’m impatient, what can I say).

As a final stroke of genius, ASUS has added a reset CMOS button directly on to the remote. Nice thinking gang!