Albatron PX915P-AGPe Review --- TheThirdMedia Hardware

The overclocking abilities of the PX915P-AGPe were quite good. I was able to achieve a 244MHz FSB using a 16x multiplier, giving a total frequency of 3.9GHz. The board was also able to handle a 250MHz FSB with reasonably limited cooling in place. However, this was about the limit of both my processor and the cooling setup. Nevertheless, this overclock was quickly achieved and I am sure with more time available, much bigger numbers could have been achieved. Albatron PX915P-AGPe Review

I tested the board using the 244MHz FSB as it was a little cooler and allowed for a higher multiplier. As you can see, processor performance was slightly improved and the memory bandwidth took a healthy performance boost. This allowed for a few more frames in Doom 3 and Far Cry.

[Pages]
   Last Page
   [1]· Albatron PX915P-AGPe Review
   [2]· 2 - Features
   [3]· 3 - Board Layout
   [4]· 4 - System BIOS
   [5]· 5 - Test System Specs
   [6]· 6 - Subsystem Testing
   [7]· 7 - Memory Benchmarks
   [8]· 8 - Synthetic Benchmarks
   [9]· 9 - Real World Benchmarks
   [10]· 10 - Overclocking Results
   [11]· 11 - Conclusion
   Next Page



	TheThirdMedia Hardware → Mainboard Guide → Mainboard Article > Albatron PX915P-AGPe Review